Concrete Overlay in Indianapolis, IN
A New Surface Without Breaking Up the Old Slab
Polymer-modified overlays bond to sound concrete in layers from about 1/8 inch up to roughly 3/4 inch, a fraction of the depth of a new 4-inch slab, which means a tired surface can look refreshed without jackhammers or haul trucks. Holsclaw Concrete LLC installs concrete overlay systems for houses and commercial properties in Indianapolis, IN, Carmel, IN, and Fishers, IN, including microtopping, stamped and spray-textured finishes, self-leveling interior toppings, pool deck coatings, and garage and basement floor overlays.
Our woman-owned, family-owned crew has worked with concrete for 30 years, and that background matters because an overlay is only as good as the slab underneath it. We inspect for movement, moisture, and delamination before recommending anything, and if replacement makes more sense, we say so up front. Licensed and insured, we also offer a 5% loyalty discount to all returning customers. Request a free on-site look at your current concrete surface through our quote form.
Our Concrete Overlay Services
Microtopping
Thin, trowel-applied layers of polymer cement create a smooth, modern finish over worn interior floors, entry steps, porches, and patios. Colors are blended into the mix or added later, and the surface is sealed for stain resistance and easy cleaning.
Stamped Overlays
A thicker, stampable overlay accepts the same texture mats used on new concrete. Existing patios and walkways gain realistic slate, flagstone, or brick textures with color and release accents, without the cost and mess of a full tear-out.
Self-Leveling Overlays
Pourable cement toppings find their own level across uneven interior slabs, creating a smooth base ready for polishing, staining, or a new floor covering. They correct worn, pitted, or out-of-level surfaces in basements, kitchens, and commercial spaces with minimal added height.
Spray-Textured Overlays
Sprayed and troweled knockdown finishes give patios, walkways, and porches a slip-resistant texture that hides minor imperfections. This finish is popular around pools and entries because it stays comfortable under bare feet and offers good grip when wet.
Pool Deck Overlays
Chlorine, sun, and constant splashing wear down original pool decks until they crack, stain, and roughen. A bonded overlay restores the deck with a textured, lighter-colored surface that stays safer underfoot, without disturbing the coping or pool shell.
Garage and Basement Floor Overlays
Pitted garage floors and stained basement slabs get a fresh, durable wearing surface that can be colored, sealed, or used as a base for coatings. Overlays even out scaling from road salt and old adhesive residue so the floor looks finished again.
Benefits of Concrete Overlay
A Fresh Look in Days, Not Weeks
Overlay projects skip demolition, hauling, base work, and long curing waits. Most residential surfaces are prepped, coated, and sealed within a few days, so patios and walkways return to use quickly instead of sitting fenced off for weeks.
Less Waste and Disruption
Keeping the existing slab in place means no jackhammers, no dump trucks crossing the lawn, and no tons of broken concrete headed to a landfill. Landscaping, fences, and neighbors all stay undisturbed while the surface gets a second life.
Design Freedom on Plain Gray Concrete
Stamped textures, scored patterns, integral tints, and stained accents turn a dull slab into something that complements brick, siding, and landscaping. Options that once required pouring new concrete can now be layered over the surface you already have.
Better Traction Underfoot
Textured overlays and slip-resistant sealers add grip to steps, pool decks, and entries that become slick when wet. Families with children and older relatives can move around the yard with more confidence through rainy springs and icy mornings.
Protection for the Original Slab
A sealed overlay shields the concrete beneath from water intrusion, salt, and staining. The base slab stops deteriorating at the surface, and the new wearing layer takes the abuse that would otherwise keep chipping away at the structure below.
Interior and Exterior Versatility
The same family of products works on basement floors, retail showrooms, porches, and pool surrounds. One contractor can coordinate a matching look from the living room through the back door to the patio, with each system suited to its exposure.
Give a Sound Slab a Second Act
A cracked, stained, or faded surface does not always mean the concrete underneath has failed, and tearing out a sound slab wastes money, time, and material. Holsclaw Concrete LLC evaluates each surface in Indianapolis, IN, honestly, then recommends an overlay only where the base can support one. When it fits, you get new color, texture, and traction in a matter of days, with your yard and schedule barely interrupted. If the slab is past saving, we will say so and walk you through other paths. Ask for a free evaluation of your existing slab on our quote form to learn which option makes sense.
frequently asked questions
Can new material be applied over old concrete?
Yes, as long as the existing slab is structurally sound, clean, and properly profiled. Holsclaw Concrete LLC grinds or shot-blasts Indianapolis, IN, surfaces so the polymer-modified overlay bonds mechanically instead of sitting loosely on top of sealers or dirt.
How thick is a concrete overlay?
Thickness depends on the system. Microtoppings go down in very thin coats, often around 1/16 inch or less each, while stampable overlays usually run 1/4 to 3/4 inch, and self-leveling toppings vary with how much correction the floor needs.
Will cracks in the old slab come back through an overlay?
Moving cracks usually will, because the overlay cannot stop the slab beneath from shifting. Stable hairline cracks can be repaired and bridged, and existing control joints are honored in the new surface so movement has a planned place to go.
Can overlays be used indoors?
Absolutely. Self-leveling toppings and microtoppings are common in basements, kitchens, offices, and showrooms, where they create seamless floors that can be stained, polished, or sealed. Indoor systems can use low-odor sealers so homes and businesses stay comfortable during application.
Is an overlay a good option for an aging pool deck?
Often, yes. A textured overlay renews a weathered deck without disturbing the pool, and lighter colors stay cooler under bare feet. Holsclaw Concrete LLC checks Indianapolis, IN, pool decks for heaving or settling first, since moving sections need repair before resurfacing.
What surfaces are poor candidates for an overlay?
Slabs that are heaving, sinking, crumbling throughout, or cracked from structural movement make poor bases. Concrete with ongoing moisture problems or a weak, dusty surface also struggles to hold a bond, and those cases usually call for repair or replacement first.
Is an overlay the same thing as resurfacing?
They overlap. Resurfacing generally means a thin cement-based coat that restores a damaged surface to a uniform finish, while overlays include thicker decorative and self-leveling systems that can add texture, pattern, and color well beyond a basic renewal.
How soon can an overlay be walked on?
Light foot traffic is usually fine within about 24 hours, depending on temperature and the sealer used. Patio furniture and grills should wait a couple of days, and vehicles on garage overlays generally need several days before parking resumes.
HAPPY CUSTOMERS!
What our customers say
Thank you for contacting us.
We’ll get back to you as soon as possible.