Concrete Removal in Indianapolis, IN
Clear the Ground for Something Better
Every 4-inch concrete slab weighs about 50 pounds per square foot, which means tearing out a 600-square-foot driveway puts roughly 15 tons of broken material on the ground. Holsclaw Concrete LLC handles concrete removal for residential and commercial owners in Indianapolis, IN, Carmel, IN, and Fishers, IN, breaking out driveways, patios, sidewalks, interior slabs, steps, and old footings, then saw cutting clean edges, loading debris, and hauling it to recycling so the site is ready for what comes next.
Demolition near a house, garage wall, or a neighbor’s fence takes care, and our family-owned, woman-owned crew treats every removal that way. Licensed and insured, we have spent 30 years in concrete learning where to cut, where to break, and how to protect the slabs, lawn, and utilities that stay behind. Each job starts with a detailed consultation at no charge. Use our contact page to request an estimate, and we will plan the work around your property.
Our Concrete Removal Services in Indianapolis, IN
Driveway Removal
Cracked, heaved, or sunken driveways come out in sections, broken with a breaker or jackhammer and lifted with a skid steer. We separate the slab from the garage apron and street edge first, so the parts staying in place keep clean, undamaged edges.
Patio and Sidewalk Removal
Backyard patios and narrow walks often sit close to foundations, fences, and planting beds, so smaller equipment does the work. Slabs are broken into manageable pieces, wire mesh is cut free, and landscaping along the edges is protected while debris is carried out.
Concrete Saw Cutting
Diamond blades create straight, controlled lines where only part of a slab needs to go. Saw cutting before breaking keeps cracks from running into the section that stays, and it leaves a square edge ready for new concrete to tie into later.
Interior Slab Removal
Basement floors, garage slabs, and commercial shop areas require removal indoors, where ventilation, dust, and tight access matter. Walls and plumbing stubs are marked, the floor is cut into handling sections, and broken pieces are removed through a door without scarring finished surfaces.
Step and Footing Demolition
Crumbling front steps, old stoops, and buried footings from removed decks or sheds are broken out down to the depth your next project requires. Steps attached to a house are separated carefully so siding, thresholds, and foundation walls come through the work unharmed.
Hauling and Recycling
Every load leaves the property by truck rather than sitting in a pile on your lawn. Clean broken concrete goes to recycling yards where it is crushed into aggregate for road base, and rebar and mesh are pulled out for scrap whenever possible.
Benefits of Concrete Removal
A Proper Base for New Concrete
Pouring over a failed slab carries its problems forward. Full removal exposes the subgrade, so soft spots and washed-out stone can be compacted and drainage corrected before new concrete goes down on ground that will actually support it.
Protection for What Stays
Your siding, garage door, sprinkler heads, and neighbor’s fence sit within reach of a breaker. Careful equipment placement, plywood over turf, and controlled breaking keep the surrounding property intact, so the cleanup ends with the concrete rather than a list of new repairs.
No Heavy Lifting on Your End
Breaking up even a small patio by hand means renting equipment, swinging a sledge for hours, and finding somewhere to dump several tons of rubble. Handing that job to a crew saves your back, your weekend, and the trailer you would otherwise borrow.
Less Waste in the Landfill
Concrete is one of the most recyclable building materials there is. Sending broken slabs to a crushing yard instead of a landfill turns your old driveway into base stone for future projects and keeps tons of heavy debris out of disposal sites.
Fewer Hazards Around the Property
Heaved slabs, broken steps, and jagged edges catch toes, mower blades, and bicycle tires. Clearing out failing concrete removes those hazards right away, which matters most around entries, play areas, and any walkway that guests or customers use every day.
One Crew From Tear-Out to Pour
When the same team removes the old concrete and places the new, nothing gets lost between contractors. Grades, elevations, and drainage decisions made during demolition carry straight into forming, which keeps the schedule tight and the finished surface consistent.
Make Room for What Your Property Needs Next
Old concrete has a way of setting the limits of a project long after it stops doing its job. Clearing it out properly gives you back the space, the grade, and the options. Holsclaw Concrete LLC removes driveways, patios, steps, and slabs across Indianapolis, IN, with the same care we bring to new pours, protecting what stays and recycling what goes. Whether you are replacing a driveway or turning a cracked patio back into lawn, there is no need to commit before you see the plan. Tell us what needs to go on our quote form, and we will walk the site and map the removal with you.
frequently asked questions
How much debris does removing a driveway create?
More than most owners expect. Every square foot of a standard 4-inch slab carries roughly 50 pounds, so an average two-car driveway produces around 15 tons of rubble, which is why removal is planned around truck capacity and access.
Is removed concrete recycled?
Usually, yes. Recycling yards crush clean concrete into graded aggregate used for road base, fill, and drainage stone. Holsclaw Concrete LLC hauls broken slabs from Indianapolis, IN, properties to recycling whenever the material is free of soil, wood, and trash.
Can part of a slab be removed without damaging the rest?
Yes, as long as the section is saw cut. A full-depth cut along the removal line gives the break a controlled stopping point, so cracks do not travel into the concrete you are keeping, and the new pour has a clean joint.
Will removal equipment damage my lawn or landscaping?
Some turf wear is normal along the access route, but it can be kept to a minimum. Plywood or ground mats spread the weight of loaders, compact machines handle tight yards, and beds next to the work are marked before any breaking starts.
What happens to rebar and wire mesh during removal?
Steel reinforcement is cut free as the slab breaks apart, usually with torches or a reciprocating saw. Separating it keeps the concrete acceptable at recycling yards, and the bundled steel goes to a scrap recycler instead of mixing with rubble.
How long does concrete removal usually take?
Most residential driveways and patios come out in a single day. Larger slabs, thick reinforced concrete, or tight access can stretch the work to 2 or 3 days, and Holsclaw Concrete LLC confirms the schedule for each Indianapolis, IN, job during the estimate.
What is done with the ground once the concrete is gone?
That depends on what comes next. For a new pour, the subgrade is regraded, soft areas are dug out, and fresh stone is compacted. When the area becomes lawn or garden, topsoil is brought in and leveled so seed or sod can root.
How is dust controlled during concrete removal?
Water is the main tool. Misting the cutting line and broken surfaces keeps silica dust from going airborne, and saws run with water feeds. Indoors, vacuums with HEPA filtration and sealed-off doorways keep dust out of the living space.
HAPPY CUSTOMERS!
What our customers say
Thank you for contacting us.
We’ll get back to you as soon as possible.